Advantech ADAM-4022T
Product is End of Life : 2020-10-26
2-ch Serial Based Dual Loop PID Controller with Modbus
- Channels: 4
- Input Type: mA, V, Thermistor, RTD
- Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
- Watchdog Timer
The Advantech ADAM-4022T dual loop PID controller is a Serial-based controller. It was designed as the product of Advantech’s ADAM-4000 series with Serial based PID controller. With an excellent accuracy ±0.15%, the ADAM-4022T is an ideal controller for temperature and other process variable in heating and cooling application, test and environmental work. ADAM-4022T utility software can help you to select input and range configuration, set the operating parameter (SP, Sv, Pv ….. etc) for your process control needed. ADAM-4022T utility software also integrates the trend chart to help you to monitor and debug your control setting. ADAM-4022T was designed to use in industrial environment. It can be installed in standard DIN rail inside the cabinet. And it can be powered by unregulated 10~30Vdc to meet the various power supplied source in field. It also withstands ambient temperature up to 60 o C and resists the effects of vibration and mechanical shock.
Display
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
2 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V
Current Input
0~20 mA, 4~20mA
Direct Sensor Input
Thermistor 3k, 10k RTD (Pt100, 1000)
Burn-out Detection
Yes
Channel Independent Configuration
Yes
Sampling Rates
10 samples/second (total)
Resolution
16-bit
CMR @ 50/60 Hz
92 dB
Analog Output
Channels
2 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V
Current Output
0~20 mA, 4~20mA
General
Watchdog Timer
System (1.6 second)
Connector
2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command & Modbus/RTU
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Digital Input
Channles
2
Input Voltage
Logic level 0: close to GND Logic level 1: open
Digital Output
Channels
2 Open collector to 30V, 30 mA max. load
Power Dissipation
300 mW
Ordering Information
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
2 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V
Current Input
0~20 mA, 4~20mA
Direct Sensor Input
Thermistor 3k, 10k RTD (Pt100, 1000)
Burn-out Detection
Yes
Channel Independent Configuration
Yes
Sampling Rates
10 samples/second (total)
Resolution
16-bit
CMR @ 50/60 Hz
92 dB
Analog Output
Channels
2 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V
Current Output
0~20 mA, 4~20mA
General
Watchdog Timer
System (1.6 second)
Connector
2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command & Modbus/RTU
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Digital Input
Channles
2
Input Voltage
Logic level 0: close to GND Logic level 1: open
Digital Output
Channels
2 Open collector to 30V, 30 mA max. load
Power Dissipation
300 mW
Ordering Information
Part Number | Description |
ADAM-4022T-AE | Serial Based Dual Loop PID Controller |
Accessory | |
ADAM-4520-D2E | RS-232 to RS-422/485 converter w/ isolated Rev. D2E |
ADAM-4561-AE | 1-port Isolated USB to RS-232/422/485 Converter |
PCLS-ADAMVIEW32 | HMI Software for ADAM I/O Products |
PWR-242-AE | DIN-rail Power Supply |
PWR-243-AE | Panel Mount Power Supply |
PWR-244-AE | Panel Mount Power Supply |
I clienti che hanno visto questo prodotto hanno anche consultato