MOXA ICF-1170I Series

SPHINX in Europa
IT
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Gruppi di prodotti > Mediaconverter > MOXA ICF-1170I Series

MOXA ICF-1170I Series

Industrial CAN-to-fiber converters

MOXA ICF-1170I Series
2843_27925.png
2843_27926.png
2843_27927.png
  • ProprietàProprietà
  • DescrizioneDescrizione
  • Further informazioniFurther informazioni
  • PDFPDF
  • Transmits up to 2 km over optical fiber
  • Converts CAN signals to fiber and fiber to CAN signals
  • Baudrate up to 1 Mbps
  • Dual power inputs for redundancy
  • DIP switch for 120 Ù terminal resistance
  • DIP switch for fiber test mode
  • LEDs for Fiber TX, Fiber RX, Power 1, Power 2
  • Wide temperature model available for -40 to 85°C environments
  • Fully compatible with the ISO 11898 standard
The ICF-1170I series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 KV optical isolation for the CANbus system and dual power inputs with alarm contact relay to ensure that your CANbus system will remain online.

Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (TX) will continuously send out a data signal and the “Fiber TX” LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (RX) receives the data signal form the TX side, the “Fiber RX” LED will light up.

ProdGrafik

CAN Communication

CAN Interface
ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND)

Protocols
CAN 2.0A and 2.0B (ISO 11898-2)

Connector
Type 3-pin removable screw terminal x1

Termination Resistor
Dip switch selector for 120 Ù terminal resistor

Transfer Rate
Up to 1 Mbps

System Delay
150 ns

Isolation Protection
2 kV

ESD Protection
Supports 15 kV

Transmission Distance
Max 2 km (depends on the data rate and the protocol used)
    Note The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard.

LED Indicators
PWR1, PWR2, Fiber TX, Fiber RX


Fiber Communication

Connector Type
ST (multi-mode) fiber ports

Support Cable
50/125, 62.5/125, or 100/140 ìm (multi-mode)

Wavelength
850 nm

TX Output
Multi-mode (> -5 dBm)

Rx Sensitivity
Multi-mode (-20 dBm)


Physical Characteristics

Housing
Metal

Dimensions
30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)


Environmental Limits

Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)


Power Requirements

Input Voltage
12 to 48 VDC dual power inputs for redundant power

Power Consumption
ICF-1170I: 221 mA @ 12 V
Alarm Contact: 1 relay output with current carrying of 1 A @ 24 VDC

Voltage Reversal Protection
Protects against V+/V- reversal


Over Current Protection
1.1 A (protects against two signals shorted together)


Standards and Certifications

Safety
UL 508, EN 60950-1

EMC
CE, FCC

EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A

EMS
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 2,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 2,
EN 61000-4-8 (PFMF) Level 3

Freefall
IEC 60068-2-32

Green Product
RoHS, CRoHS, WEEE


MTBF (mean time between failures)

Time
792,085 hrs

Database
Telcordia (Bellcore), GB



Ordering Information

           Available Modules
ICF-1170I-M-ST CANbus to fiber converter, multi-mode, ST connector, 0 to 60°C
ICF-1170I-M-ST-T CANbus to fiber converter, multi-mode, ST connector, -40 to 85°C


I clienti che hanno visto questo prodotto hanno anche consultato
Accept

This website uses cookies to provide the best possible experience. More information.