MOXA MGate 5105-MB-EIP Series
1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways
- Support for both EtherNet/IP adapter and scanner Download Moxa´s MGate Gateway Brochure and White Paper
- Effortless configuration via web or Windows utility
- Complete packet analysis and diagnosis information for maintenance
- Easy I/O data maintenance via web interface
- microSD card for configuration and system log backup
- -40 to 75°C wide operating temperature models available
- Modbus port with 2 kV built-in isolation protection
- Built-in Ethernet cascading for easy wiring
- Supports Moxa´s MXview industrial network management software via the MXview Plug-in
The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communication. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices.
Configuration Backup via microSD Card
The MGate 5105-MB-EIP is equipped with a microSD card slot. A microSD card can be used to back up both the system configuration and system log, and can be used to conveniently copy the same configuration to several MGate 5105-MP-EIP units. The configuration file stored in the microSD card will be copied to the MGate itself when the system is rebooted.
Effortless Configuration and Troubleshooting via Web Console
The MGate 5105-MB-EIP also provides a web console to make configuration easy without having to install an extra utility. Simply log in as an administrator to access all settings, or as a general user with read-only permission. Besides configuring basic protocol settings, you can use the web console to monitor I/O data values and transfers. In particular, I/O Data Mapping shows data addresses for both protocols in the gateway’s memory and I/O Data View allows you to track data values for online nodes. Moreover, diagnostics and communication analysis for each protocol can also provide helpful information for troubleshooting.
Configuration Backup via microSD Card
The MGate 5105-MB-EIP is equipped with a microSD card slot. A microSD card can be used to back up both the system configuration and system log, and can be used to conveniently copy the same configuration to several MGate 5105-MP-EIP units. The configuration file stored in the microSD card will be copied to the MGate itself when the system is rebooted.
Effortless Configuration and Troubleshooting via Web Console
The MGate 5105-MB-EIP also provides a web console to make configuration easy without having to install an extra utility. Simply log in as an administrator to access all settings, or as a general user with read-only permission. Besides configuring basic protocol settings, you can use the web console to monitor I/O data values and transfers. In particular, I/O Data Mapping shows data addresses for both protocols in the gateway’s memory and I/O Data View allows you to track data values for online nodes. Moreover, diagnostics and communication analysis for each protocol can also provide helpful information for troubleshooting.
- Ethernet Interface
- Protocol
- EtherNet/IP, Modbus TCP
- Number of Ports
- 2 (Ethernet cascade)
- Speed
- 10/100 Mbps, Auto MDI/MDIX
- Connector
- 8-pin RJ45
- Magnetic Isolation Protection
- 1.5 kV (built-in)
- Protocol
- EtherNet/IP
- Class
- Adapter, Scanner
- CIP Objects Supported
- Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
- Max. Number of Connections
- MGate as Adapter: 16 connections for read-only, 1 connection for read/write
- MGate as Scanner: 100 connections
- Max. Total I/O Data Size
- Input: 2048 bytes (496 bytes per connection)
- Output: 2048 bytes (496 bytes per connection)
- Class
- Modbus
- Functions Supported
- 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. Number of Commands
- 100
- Max. Number of Connections
- MGate as Modbus TCP Master: 32 connections
- MGate as Modbus TCP Slave: 16 connections
- Max. Total I/O Data Size
- Input: 2048 bytes
- Output: 2048 bytes
- Functions Supported
- Modbus Serial Interface
- Number of Ports
- 1
- Serial Standards
- RS-232/422/485, software selectable
- Connectors
- DB9 male
- Isolation
- 2 kV (built-in)
- RS-485 Data Direction Control
- ADDC® (automatic data direction control)
- Pull High/Low Resistor for RS-485
- 1 KÙ, 150 KÙ
- Terminator for RS-485
- 120 Ù
- Data Bits
- 5, 6, 7, 8
- Stop Bits
- 1, 1.5, 2
- Parity
- None, Even, Odd, Space, Mark
- Flow Control
- RTS/CTS
- Baudrate
- 50 bps to 921.6 Kbps
- Number of Ports
- External Storage Drive
- Interface
- microSD
- Standard
- SDHC v2.0
- Interface
- Serial Signals
- RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422
- Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w
- Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w
- Data+, Data-, GND
- RS-232
- Software
- Operation Modes
- EtherNet/IP Adaptor/Scanner, Modbus RTU/ASCII/TCP Master/Slave
- Configuration Options
- Serial console, Windows utility
- Utilities
- MGate Manager for Windows 2000/XP/2003/Vista/Server 2008/7/8 (x86/x64), Windows Server 2008 R2/2012 (x64)
- Bonus Features
- QuickLink
- Operation Modes
- Physical Characteristics
- Housing
- Metal (IP30)
- Weight
- 507 g
- Dimensions
- 36 x 105 x 140 mm (1.42 x 4.13 x 5.51 in)
- Housing
- Environmental Limits
- Operating Temperature
- Standard Models: 0 to 60°C (32 to 140°F)
- Wide Temp. Models: -40 to 75°C (-40 to 167°F)
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
- Altitude
- Up to 2000 m
- Operating Temperature
- Power Requirements
- Input Voltage
- 12 to 48 VDC
- Power Connector
- Terminal block
- Power Consumption
- 455 mA @ 12 VDC, 125 mA @ 48 VDC
- Input Voltage
- Standards and Certifications
- Safety
- UL 508, EN 60950-1
- EMC
- CE, FCC
- EMI
- EN 55022 Class A, FCC Part 15 Subpart B Class A
- EMS
- EN 55024,
- EN 61000-4-2 (ESD) Level 4,
- EN 61000-4-3 (RS) Level 3,
- EN 61000-4-4 (EFT) Level 4,
- EN 61000-4-5 (Surge) Level 3,
- EN 61000-4-6 (CS) Level 3,
- EN 61000-4-8,(PFMF) Level 3
- Shock
- IEC 60068-2-27
- Freefall
- IEC 60068-2-32
- Vibration
- IEC 60068-2-6
- Safety
- Reliability
- MTBF (mean time between failures)
- 513,139 hrs
Ordering Information
Available Modules MGate 5105-MB-EIP 1-port Modbus-to-EtherNet/IP gateway, 0 to 60°C operating temperature MGate 5105-MB-EIP-T 1-port Modbus-to-EtherNet/IP gateway, -40 to 75°C operating temperature - MTBF (mean time between failures)
I clienti che hanno visto questo prodotto hanno anche consultato