MOXA TN-5510A-8PoE-2GLSX-ODC Series
EN 50155 8+2G-port Q-ODC® managed Ethernet switches with up to 8 PoE ports
- 2 Gigabit fiber ports with embedded multi-mode Q-ODC® interface
- Isolated power inputs with wide 24 to 110 VDC power supply range
- Essential compliance with EN 50155*
- -40 to 75°C operating temperature range
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
- 8 IEEE 802.3at/af compliant combo PoE and Ethernet ports
- Provides up to 30 watts per PoE port
The ToughNet TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSXODC series M12 managed Ethernet switches are designed for railway applications, such as rolling stock and wayside installations. The TN series switches use M12 and other circular connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the 24 to 110 VDC wide power input range and isolated power inputs not only allow you to use the same type of power source at different sites around the globe, but also increase the reliability of your communications system. The TN-5510A-2GLSX-ODC and TN-5510A-8PoE-2GLSX-ODC switches provide up to 8 Fast Ethernet M12 ports, and 2 ports on the down side to provide the Gigabit fiber interface with an embedded 2-km multimode fiber transceiver. The TN-5510A-8PoE-2GLSX-ODC series Ethernet switches have 8 Fast Ethernet M12 ports with 8 IEEE 802.3at/af compliant PoE (Powerover-Ethernet) ports. The PoE switches are classified as power source equipment (PSE); they provide up to 30 watts of power per port, and can be used to power IEEE 802.3at/af compliant powered devices (PDs), such as IP cameras, wireless access points, and IP phones. Moreover, the -40 to 75°C operating temperature and IP54-rated waterproof enclosure allow deployment in harsh environments. The TN-5500A series Ethernet switches are compliant with essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD, and vibration, as well as conformal coating and power insulation, making the switches suitable for a variety of industrial applications.
Technology
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, SNMP Inform, LLDP, IEEE 1588 PTP v2, IPv6, NTP Server/Client, EtherNet/IP, Modbus/TCP
MIB
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE802.3x flow control, back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
Interface
Fast Ethernet
Front cabling, M12 D-coded 4-pin female connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Gigabit Ethernet
Down cabling, Q-ODC® connector, 1000M (Gigabit Ethernet port), PoE (for PoE models)
Console Port
M12 A-coding 5-pin male connector
System LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators
10/100M (Fast Ethernet port), 1000M (Gigabit Ethernet port)
Alarm Contact
2 relay outputs in one M12 A-coding 5-pin male connector with current carrying capacity of 1 A @ 30 VDC
Power Requirements
Overload Current Protection
Yes
Connection
M23 connector
Reverse Polarity Protection
Yes
Input Voltage
WV: 24 to 110 VDC (16.8 to 137.5 VDC)
Max. Input Current
TN-5510A-2GLSX-ODC series: 0.45 A @ 24 VDC; 0.1 A @ 110 VDC
Physical Characteristics
Housing
Aluminium alloy, IP54 protection (optional protective caps available for unused ports)
Dimensions
TN-5510A-2GLSX-ODC series:
185 x 204.3 x 76.0 mm (7.28 x 8.04 x 2.99 in)
TN-5510A-8PoE-2GLSX-ODC series:
185 x 219.3 x 115 mm (7.28 x 8.63 x 4.53 in)
Weight
TN-5510A-2GLSX-ODC series: 1,805 g
TN-5510A-8PoE-2GLSX-ODC series: 2,690 g
Installation
Panel mounting, DIN-rail mounting (with optional kit: DK-DC50131)
Environmental Limits
Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Vibration
IEC 60068-2-6, 2-17.8 Hz: ±1.6 mm; 17.8-500 Hz: 2 g; 2 hours/axis
Shock
IEC 60068-2-27, 20 g / 11 ms
Ingress Protection
IEC 60529, IP54
Altitude
Up to 2000 m
Note
Please contact us if you require products guaranteed to function at higher altitudes
Standards and Certifications
Safety
UL/cUL 508, EN 60950-1 (LVD)
EMC
EN 55022, EN 55024
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact 6 kV; Air 8 kV
IEC 61000-4-3 RS: 20 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Power 2 kV; Signal 2 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Rail Traffic
(for panel mounting installations) EN 50155 (essential compliance*), EN 50121-4, EN 50121-3-2, EN 45545-2
*Please contact Moxa us for details.
Shock
IEC 61373
Freefall
IEC 60068-2-32
Vibration
EN 50155, IEC 61373
MTBF
Time
TN-5510A-2GLSX-ODC series: 722,049 hrs
Standard
Telcordia SR332, GB, 25°C
Ordering Information | |
Available Models | |
TN-5510A-2GLSX-ODC-WV-T | Managed Ethernet switch with 8 PoE, 10/100BaseT(X) ports, and 2 1000BaseLSX fiber optic Q-ODC ports, power input (24 - 110 VDC), -40 to 75 °C operating temperature |
TN-5510A-8PoE-2GLSX-ODC-WV-CT-T | Managed Ethernet switch with 8 PoE, 10/100BaseT(X) ports, and 2 1000BaseLSX fiber optic Q-ODC ports, power input (24 - 110 VDC), -40 to 75 °C operating temperature,conformal coating model |
I clienti che hanno visto questo prodotto hanno anche consultato