TERZ NITE-RF Fast Ethernet

With an installation depth of only 32.5 mm and a height of 105 mm, the Industrial Ethernet switches impress with their extremely flat and high-quality aluminium housing. The ultra-compact switches can be used in any control cabinet thanks to the 24 VAC/VDC power supply with inrush current limiting and reverse polarity protection. Due to the reduced footprint and the arrangement of all connections on the front , switch cabinets and cabling can be optimized to reduce the costs. The high-quality DIN rail holder made of metal ensures a firm and secure hold on the DIN rail. Like all TERZ Industrial Ethernet switches, the flat NITE-RF are available in two frame forwarding variants and fully suitable for PROFINET applications.

General

Switch:
IEEE802.3 Store and Forward; non-blocking wire speed

Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes

Frame size:
2,048 Bytes

MAC table size:
2,000 addresses

Quality of Service:
Yes – 4 priority queues

Energy Efficient Ethernet:
No

Flow Control:
No

PROFINET suitable:
Yes



Port count (RJ45)	5	8	16
MTBF (SN 29500, Mio. h)	2.709	2.005	1.109





Frame Forwarding (Art.-No.)	xxxxx0	xxxxx1
LLDP, PTCP Delay 01:80:C2:00:00:0E	Forwarding	Blocking
RSTP BPDU 01:80:C2:00:00:00	Forwarding	Forwarding

Ethernet Interfaces

IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X)

Isolation:
0.75 kVDC; Ethernet Port ↔ housing | Port ↔ Port

Connection type:
RJ45

Port Count | Speed:
5,8 Ports | 10/100 Mbit/s

Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)

Power supply / electronics

Nominal voltage:
Vin 24 VAC / 24 VDC

Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC

Connection type:
3-pole pluggable, screw connector (+ - FE)

Wire cross-section:
0,08 to 2,5 (AWG 28 to 12)

Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)

Inrush current limiter:
Yes

Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC

Polarity protection:
Yes

Power failure bridging:
10 ms DIN 50155

PCB Conformal Coating:
No

Protection category:
III

Isolation:
0.75 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing



Port count (RJ45)	5	8	16
Power consumption (W)          Idle | full load	0.4 | 0.9	0.4 | 1.15	1,9 | 2,3
Input current (mA)    Idle | full load	16 | 36	16 | 48	78 | 99
Inrush current    (A)	8	8	8

Mechanical properties

Housing material:
Anodised aluminium, stainless steel

Mounting:
35 mm DIN rail

IP Protection class (operation):
IP30



Port count (RJ45)	5	8	16
Width (mm)	42	58	110
Height (mm)	105	105	105
Depth (mm)	32,5	32,5	32,5
Weight (g)	205	255	405

EMC and environmental specifications

Operating temperature:
-40°C to 70°C

Storage temperature:
-40°C to 85°C

Relative humidity (operation):
0%-95% (not condensing)

Relative humidity (storage):
0%-95% (not condensing)

Atmospheric pressure (operation):
2,000 m (795 hPa)

EMC immunity:
DIN EN - 61000-6-2, 55024

EMC radiated emission:
DIN EN 61000-6-4, 55032

Mechanical stability:
DIN EN 61373

Approvals and certifications

CE, DIN EN 60950-1

Status and diagnostic indicators

LED:
Power | Link/Activity per Port

ORDERING INFORMATION

Available Modules
Article	Art.-No.	Specification
NITE-RF5-1100	111400	5xRJ45, IP30, FE, 24 V
NITE-RF8-1100	111600	8xRJ45, IP30, FE, 24 V
NITE-RF16-1100	111800	16xRJ45, IP30, FE, 24 V
NITE-RF5-1101	111401	5xRJ45, IP30, FE, 24 V, LLDP Blocking
NITE-RF8-1101	111601	8xRJ45, IP30, FE, 24 V, LLDP Blocking
NITE-RF16-1101	111801	16xRJ45, IP30, FE, 24 V, LLDP Blocking