NetModule NB2810-2LWac2CmDf-GViFIx
Vehicle Router with 2x LTE + 2x WLAN-ac + 2x GbE-M12 + 2x CAN-passive + 1 TB SSD + GNSS + Virtualization + FMS2IP + ITxPT + E-Mark
Proprietà
Descrizione
Further informazioni
Prodotti similari
Stampare questa pagina
Richiedere un prezzo
Mostrare le miei note
PDF
Proprietà
Descrizione
Further informazioni
PDF
- 2x LTE, UMTS, GSM
- 4x Micro SIM
- 2x Dual-band IEEE 802.11a/b/g/n/ac, 100 Clients in Access Point Mode
- 2x Gigabit Ethernet M12
- 1x CAN passive (read access only) with FMS to IP Gateway
- 1 TB SSD
- 12 VDC to 48 VDC, Ignition Sense
- Multi-GNSS
- -25 °C to +70 °C
- Routing, Network Services, VPN, Firewall, Link Management, Supervisor, SDK, LXC Virtualization, FSM2IP, free updates
- CE (RED), Vehicle (UN ECE R10, UN ECE R118), ITxPT (coming)
- Extensions on request
The NB2810 provides in-vehicle wireless Internet access according to ITxPT requirements. The router is equipped with multiple LTE modules that can be bundled, two WiFi access points with the latest IEEE 802.11ac standard, GNSS for positioning and 2 Gigabit Ethernet ports with M12 connectors, 2 CAN interfaces and 1 TB internal storage capacity. Thanks to the integrated ignition detection, the NB2810 can remain switched on even after the vehicle has been switched off. This allows the safe completion of all tasks.
The router meets the UN ECE R10 (E-Mark), UN ECE R118 regulations and the M12 and FAKRA connectors according to ITxPT. This, combined with its numerous features and high performance, makes it the ideal communication gateway for applications such as Passenger WiFi, Telematics, Fleet Management or CCTV.
The software is based on well proven components including an embedded Linux operating system and a powerful communication protocol suite. Customer specific software extensions may be implemented via a sophisticated SDK.
Applications
- Fleet Management
- Passenger WiFi
- Passenger Infotainment
- Ticketing
- CCTV
- Telematics
Specifications
- Mobile / Cellular
| Standard | 2x Multimode LTE, UMTS, GSM for EMEA 4G – LTE B1 (2100), B3 (1800), B5 (850), B7 (2600), B8 (900), B20 (800) 3G - DC-HSPA+/UMTS B1 (2100), B2 (1900), B5 (850), B8 (900) 2G - GSM/GPRS/EDGE B2 (1900), B3 (1800), B5 (850), B8 (900) Category LTE Cat 4 Antenna ports 2x2 MIMO Datarate down / up (max) 150 Mbps / 50 Mbps Voice CSFB FCC ID XPYTOBYL210 |
| Region | Europe, Middle East and Africa (EMEA |
| Connectors | 4x FAKRA D-coded |
| SIM | 4x Micro SIM - 3FF |
WiFi / WLAN
| Standard | 2x Dual-band WLAN 2.4/5 GHz a/b/g/n/ac Wireless standard IEEE 802.11a/b/g/n/ac Frequency 2.4/5 GHz Diversity 2x2 MIMO Datarate (max) 300 Mbps (2.4 GHz) / 866 Mbps (5 GHz) Modes Client or access point (up to 100 clients) FCC ID TK4WLE600VX |
| Connector | 4x FAKRA I-coded |
Ethernet
| Standard | 2x Gigabit Ethernet Ethernet standard 1000BASE-T, Auto MDIX Speed 10/100/1000 Mbps |
| Connector | 2x RJ45 |
Positioning
| Standard | 1x Multi-GNSS Receiver BeiDou, Galileo, GLONASS, GPS/QZSS 72-channel u-blox M8 engine 3 concurrent GNSS channels Antennas Active or passive Accuracy Up to 2.5 m CEP Sensitivity Up to –167 dBm Standalone, Assisted GPS Data server with JSON, NMEA data stream |
| Connector | 1x FAKRA C-coded |
USB
| Standard | 1x USB 3.0 Host |
| Connector | 1x Type A |
Serial, Fieldbus
| Protocol | 1x RS-232 Protocol EIA-232 TX, RX Signal level High > 5 VDC, low < -5 VDC Bit rate Up to 1 Mbps 2x CAN Protocol Controller Area Network V2.0B (ISO 11898) Signals CANH, CANL Signal level High > 2.75 V, low < 2.0 V Bit rate Up to 1 Mbps Isolation 1500 VDC Termination No internal bus termination Bus access Passive - read access only Active - read and write access on request (option -C) |
| Connector | 1x Terminal block header 3.5 mm (screw locking), 1x M12 A-coded female |
Extended Storage
| 1 TB SSD | |
| Capacity 1 TB | |
| Technology SSD | |
| Data Application data such as logs, media content, ... |
System
| Core | 1.3 GHz dual-core, 1 GB RAM, 4 GB flash |
| Module Slots | 2x miniPCIe (PCIe + USB), 2x miniPCIe (USB) |
Software
| Features | NetModule Router Software Package The standard software package includes an intuitive user interface, covering all modern routing protocols and enablesefficient mass deployment. General Fail-safe update (FOTA), upgrade via USB, HTTP(S), (S)FTP or TFTP, remote CLI & WebGUI, RADIUS authentication,Simple Certificate Enrollment Protocol (SCEP), logging Remote Management Manage and monitor devices with SNMP, telnet, SSH, or HTTP/HTTPS Cellular Networking Multi-SIM / soft-SIM support, multi-APN support, signal strength monitoring, dedicated bearers, GSM/CSFBcalls Wireless LAN Client or Access Point mode, multi client support, multi / hidden SSID, WPA-PSK/WPA2-PSK, WPA-RADIUS, WPA-EAP-TLS, IEEE 802.11w, RADIUS accounting, CAPWAP Link Management Link prioritisation, link aggregation, load balancing, multipath-TCP, IP-passthrough, link supervision Network Services DHCP Client, DNS server, email, SMS service, NTP Client, NTP server, DynDNS, SSH server, SNMP agent,HTTP/HTTPS/FTP server, voice gateway, SIP call routing, coovachilli hotspot Routing Destination, policy, multipath, mobile-IP, OSPF, BGP, TCP-MSS clamping, STP/RSTP, bridging, LLDP, CDP, SONMP, EDP,FDP, IRDP, VRRP, VLAN, PPPoE VPN OpenVPN, IPsec, PPTP, GRE, CSD dial-in Firewall Stateful firewall, connection tracking, NAPT, masquerading, bridge filtering |
| Licenses | GNSS Enabled service GNSS location service Server with JSON-, NMEA stream ITxPT Enabled services Inventory, FMS2IP, Vehicle2IP, location, time Standard ITxPT software compliance LXC virtualization Enabled service Linux Container (LXC) environment to integrate customer specific applications, isolated from the routerfunctionalities FMS2IP Enabled services Automatic translation of CAN messages into IP datagrams according to FMS Standard. Services FMStoIP, VEHICLEtoIP Compliance According to ITxPT |
Power
| Input Voltage | 12, 24, 48 VDC Nominal voltages 12, 24, 48 VDC Absolute voltages 12 VDC to 48 VDC (-25 % / +20 %) Ignition sense Input with delayed shutdown |
| Ignition Sense | Yes |
| Connector | 1x Terminal block header 3.5 mm (screw locking) |
| Consumption | 20 W (max) |
Mounting
| Bracket |
Dimensions
| W x H x D | Width 164/190 mm x height 58 mm x depth 139.5 mm |
| Weight | 1200 g |
Environment
| OperatingTemperature | -25°C to +70°C |
| Ingress Protection | Level IP40 |
MTBF
| 180'000 h according SN29500 at environmental temperature 40 °C |
Certifications
| Compliance | CE according to 2014/53/EU (RED), Vehicle according to UN ECE R10, UN ECE R118, ITxPT (Hardware compliance requiresadapter cables) |
| Domain | Vehicle |
I clienti che hanno visto questo prodotto hanno anche consultato