ADDER ADDERlink XD642
A high-resolution dual-head KVM extender. Ultra-high definition 4K60 video, USB2.0 and audio are transmitted on a single CATx or fiber cable.
- Dual-head 4K60 video, USB2.0 and audio
- Point-to-point protocol for ultra-low latency.
- Flexibility between copper and fiber connectivity.
- Adder’s USB emulation ensures reliable computer bootup.
The ADDERLink XD642 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience.
Developed for enterprise organizations and high-pressure control rooms, it combines the simplicity of true plug and play and high performance 4K KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straightforward solution.
Product Features
High-resolution video, real-time control
The system supports resolutions up to 4096x2160 @ 60Hz using 8 bits per color and 4:4:4 chroma sampling.
Single cable
Video, audio, USB HID (human interface device), hi-speed transparent USB and RS232 signals are transmitted over a single CATx or fiber cable.
Up to 4km/2.5 mile extension distances
The ADDERLink XD642 supports both copper and fiber interfaces. It provides a range of up to 100m over a CAT6 cable link, and up to 4km over an optical fiber link.
Emulated USB2.0
Enables connection of any full and low speed USB HID from mouse and keyboards through to graphics tablets and joysticks.
Transparent USB2.0
Mass storage devices and isochronous devices, such as webcams and audio headsets can be used through the transparent USB2.0 hi-speed port.
EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.
Plug and Play
The ADDERLink XD642 extender is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected.
Digital audio
Video: Encapsulates up to eight channels of 24-bit, 192kHz sampled “Pulse-code modulation” PCM uncompressed audio integrated with video signal.
USB: Up to two channels of 24-bit, 96kHz sampled PCM audio.
HD quality analog audio
HD audio quality (stereo audio, 24-bit sampled at 96kHz) is available for line in/out, microphone and headphone or speakers.
Serial communications
RS232 can be passed between the units to a maximum baud rate 115K2 with RTS/CTS flow control.
Specification
- Video resolutions
- The system supports resolutions up to 4096x2160 @ 60Hz
- All known operating systems. No drivers required.
- 5Gb/s CATx or 10Gb/s fiber with ultra low latency adaptive video stream compression.
- 4 x Tri-color status LEDs
- 2 x DisplayPort™ in
- 1 x USB2.0 Type B for HID
- 1 x USB2.0 Type B for hi speed
- Line in and out analog audio
- RJ12 serial port
- RJ45 and SFP+ ports
- 4 x Tri-color status LEDs
- 2 x DisplayPort™ out
- 3 x USB2.0 full speed Type A
- 1 x USB2.0 transparent hi-speed Type A
- Mic in, headset and speaker out
- RJ12 serial port
- RJ45 and SFP ports
- TX and RX: 186mm/7.32” (w), 39mm/1.54” (h), 148mm/5.83” (d)
- TX: 1.29kg/2.84lbs
- RX: 1.24kg/2.73lbs
- 100-240 VAC, 47/63Hz
- 12 VDC 18W output from power supply unit
- 0ºC to 40ºC/32ºF to 104ºF
- -10ºC to 50ºC/14ºF to 122ºF
- 0% to 80% (non-condensing)
- UKCA, CE, FCC, ICES, RCM & cULus
Software compatibility
Extension technology
Connections
- Local unit - Transmitter (TX)
Remote unit - Receiver (RX)
Physical Design
Robust metal construction
Power supply
Operating temperature
Storage temperature
Humidity
Approvals
Extension Distance
Cable type | Distance |
Fiber (SM) | 4km/13,123ft |
Fiber (MM) | 300m/984ft |
CAT 6 | 100m/328ft |
CAT5e | 50m/164ft |
Note:
SM (Single-Mode Fiber)
MM (Multi-Mode Fiber)
CAT6 is recommended for CATx extensions. CATx extensions are limited to 2 patch connections.
Patch cables should be CAT6 or better.
What’s in the Box?
- 1x TX and RX pair
2x Power supply unit with country specific mains cable
1x DisplayPort™ cable (VSCD17)
1x USB cable (VSC24)
1x Audio 2m/6ft cable
1x Quick start guide
ORDERING INFORMATION
Available Modules | |
XD642P-DP-XX: | ADDERLink 4K dual-head extender |
Accessories | |
RMK15: | Rack mount kit |
VSCD18: | High bit rate DisplayPort™ 2m/6ft cable |
VSC50: | Serial cable, RJ12 to RS232 |
SFP-SM-LC-10G: | Single mode 10G SFP with LC connectors |
SFP-MM-LC-10G: | Multi-mode 10G SFP with LC connectors |
I clienti che hanno visto questo prodotto hanno anche consultato