Advantech MIC-1816R

MIC-1816R is a RISC (ARM) based stand-alone automation controller integrates with data acquisition and signal conditioning to provide IEPE input, analog I/O, isolated digital I/O, and counter functions. This application ready controller also supports serial communication ports and several other networking interfaces to seamlessly enable integration and rapid system development.

Specifications

Analog Input


Channels
4-ch IEPE and 8-ch general AI (Voltage/ Current)

Resolution
16 bits

Sample Rate
Single channel: 5 MS/s max.;
Multiple channels: 1 MS/s max.
Note: The sampling rate of each channel is influenced by the number of used channels.
For example, if 4 channels are used, the sampling rate will be 1MS/4 = 250 kS/s per channel.

Trigger Reference
Analog triggers

Trigger Mode
Start, Delayed Start
Stop, Delayed Stop

FIFO Size
4,000 samples

Overvoltage Protection
30 Vp-p

Input Impedance
Voltage : 1 GΩ
Current : 500 Ω

Sampling Modes
Software and external clock

Input Range
Software programmable


Gain	0.5	1	2	4	8
Unipolar	NA	0~10	0~5	0~2.5	0~1.25
Bipolar	±10	±5	±2.5	±1.25	±0.625
Gain Error (%FSR)	0.0075	0.0075	0.0075	0.008	0.008



Current Input Range
4-20mA (according to voltage range 0~10 V)

Current Input Update Rate
20 KS/s

Current Input -3dB frequency
15 Hz

Analog Trigger Reference
-10 ~ +10 V

Analog Tirrger Resolution
16 bits (0.3 mV/step)



Integrated Electronic Piezoelectric (IEPE)Excitation


Preamplifier Gain
1, 10, 100 switch selectable

AC Couple Upper Cut-Off Frequency
Gain x1, x10(-5%) : 100KHz
Gain x100(-1%) : 50KHz

AC Couple Lower Cut-Off Frequency (-3dB, 1MΩ)
0.58Hz

Accuracy
< ±2% for all gain settings

Complicance
> 24 V Current 4 mA Discharge Time Constant
> 0.3 seconds

DC Offset
< 30 mA



Analog Output


Channels
2-ch Voltage / Current-sink / Current-source (shared)

Resolution
16 bitsƒ

Sample Rate
3 MS/s max.

Output Range
Software programmable

Voltage Output Range
0V~5V, 0V~10V, ±5V, ±10V

Current Output Range
4-20mA (according to voltage range 0~10 V)

Current Mode Update Rate
20 KS/s

Current Mode Accuracy
Source : 0.15% FSR
Sink : 0.05% FSR

Current Mode Loading
Source : max. 600 Ω
Sink : depends on external voltage

Current Sink Voltage
Sink : max. 50 VDC



Isolated Digital Input


Channel
8

Isolation Protection
2,500 VDC

Interrupt Capable Channel
1

Digital Filter Channel
1

Opto-Isolator Response
100 us

Input Voltage
Logic 0 : 2V max.
Logic 1 : 5 ~ 50 V



Isolated Digital Output


Channels
8 (NPN)

Isolation Protection
2,500 VDC

Output Voltage
5 ~ 40 VDC

Sink Current
500 mA max./channel

Opto-Isolator Response
100 μs



Counter


Channels
2

Resolution
32 bits

Compatibility
5 V/TTL

Isolation Protection
2,500 VDC

Opto-Isolator Response
100 us



General


Dimensions (W x H x D)
165 x 65 x 130 mm
(6.49" x 2.56" x 5.11")

Power Consumption
15W

Power Requirements
Single 12VDC power input

Weight 2.4 kg (typical)

OS Support
Linux Ubuntu, YotcoRISC



System Hardware


CPU
NXP ARM® Cortex® -A9 i.MX6 Quad 4 x processor

Memory
Onbard DDR3 2GB

Flash
4 GB eMMC NAND Flash for O.S (Yotco only)

Ethernet
1 x 10/100/1000 Mbps

USB
1 x USB 2.0, 1 x USB 2.0 OTG

Serial Port
2 x RS-232

CAN Port
2 x 1 Mbps

Storage
1 x SATA 2.5” SSD, 1 x SD slot



Environment


Storage Humidity
5 ~ 95% RH, non-condensing

Operating Temperature
0 ~ 50°C (32 ~ 122°F) @ 5 ~ 85% RH with 0.7m/s air flow

Storage Temperature
-20 ~ 80 °C (-4 ~ 176 °F)

Indicators
LEDs for Power, IDE and LAN (Active, Status)