ADDER ADDERLink XD612

SPHINX in Europa
IT
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Gruppi di prodotti > KVM > ADDER ADDERLink XD612

ADDER ADDERLink XD612

A high resolution single or dual-head KVM extender

ADDER ADDERLink XD612
7632_32190.png
7632_32191.png
7632_32192.png
7632_32193.png
7632_32194.jpg
7632_32195.jpg
7632_32196.png
  • ProprietàProprietà
  • DescrizioneDescrizione
  • Further informazioniFurther informazioni
  • PDFPDF
  • Single or dual-head HD60 video, USB2.0 (HID) and audio are transmitted on a single CATx or fiber cable
  • Point-to-point protocol for ultra-low latency
  • Flexibility between copper and fiber connectivity
  • Adder’s USB True Emulation ensures reliable computer bootup

High definition video, USB2.0 and audio are transmitted on a single CATx or fiber cable.

The ADDERLink™ XD612 is a high performance KVMA (Keyboard, Video, Mouse and Audio) extender that is designed to provide reliable and real-time access to critical computers – regardless of the location, whilst maintaining the same user desktop experience. Developed for enterprise organizations and highpressure control rooms, it combines the simplicity of true plug and play and high performance HD KVM extension; resulting in superior functionality and flexibility in a cost-effective, reliable and straight forward solution.


Product Features

High resolution video, real-time control

The system supports resolutions up to 1920x1200 @60Hz using 8 bits per color and 4:4:4 chroma sampling. Either single or dual-heads are transmitted within a single cable.
  • A single DisplayPort™ 1.2 connection at the transmitter (TX)
  • Either one or two video outputs at the receiver (RX)
  • Dual-head utilizes DisplayPort™ MST (Multi-Stream Transport) technology
  • A local pass-through video port is provided at the TX



Single cable
HD video, USB2.0 HID (human interface device) and audio are transmitted on a single CATx or fiber cable.


Up to 4km/2.5 mile range
The ADDERLink™ XD612 (XD612) supports both copper and fiber interfaces. It provides a range of up to 100m/328ft over a CAT6 cable link, and up to 4km/2.5 miles over an optical fiber link.


Emulated USB2.0
Enables connection of any full and low-speed USB HID from mouse and keyboards through to graphics tablets and jog shuttles.


EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.


Plug and play
The XD612 extender is delivered in a zero config. state so it works, without the need for drivers or software, as soon as it is connected.


Audio
Video: Encapsulates two channels of 24-bit, 192kHz sampled “Pulse-code modulation” (PCM) audio with each video signal.
USB: Two channels of 24-bit, 96kHz sampled PCM audio.
Analog: Two channels of 24-bit, 96kHz audio for Line in/out, microphone and headphone/ speakers.


Serial communications
RS232 can be passed between the units to a maximum baud rate 115K2 with RTS/CTS flow control.
ProdGrafik

Specification

    Video resolutions
    • The system supports up to 2 heads at resolutions to a maximum of 1920x1200 @ 60Hz



    Software compatibility
    • All known operating systems. No drivers required.



    Extension technology
    • 5Gb/s CATx or 10Gb/s fiber with ultra low latency adaptive video stream compression.



    Connections

      Local unit - Transmitter (TX)
      • 4 x Tri-color status LEDs
        DisplayPort™ in and local pass-through out
        2 x USB2.0 Type B
        Line in and out analog audio
        RJ12 serial port
        RJ45 and SFP+ ports



      Remote unit - Receiver (RX)
      • 4 x Tri-color status LEDs
        2 x DisplayPort™ out
        4 x USB2.0 full speed Type A
        Mic in, headset and speaker out
        RJ12 serial port
        RJ45 and SFP+ ports



    Physical Design

      Robust metal construction
      • TX and RX: 186mm/7.32” (w), 39mm/1.54” (h), 148mm/5.83” (d)
      • TX: 1.29kg/2.84lbs
      • RX: 1.24kg/2.73lbs



      Power supply
      • 100-240 VAC, 47/63Hz
      • 12 VDC 18W output from power supply unit



      Operating temperature
      • 0ºC to 40ºC/32ºF to 104ºF



      Storage temperature
      • -10ºC to 50ºC/14ºF to 122ºF



      Humidity
      • 0% to 80% (non-condensing)



      Approvals
      • UKCA, CE, FCC, ICES, RCM, cULus



      Extension Distance

      Cable type Distance
      Fiber (SM) 4km/2.5 miles
      Fiber (MM) 300m/984ft
      C AT 6 100m/328ft
      CAT5e 50m/164ft


      Note:
        SM (Single-Mode Fiber)
        MM (Multi-Mode Fiber)
        CAT6 is recommended for CATx extensions. CATx extensions are limited to 2 patch connections. Patch cables should be CAT6 or better.




ORDERING INFORMATION

Available Modules
XD612P-DP-XX: ADDERLink XD612 HD Dual-Head Extender
Accessories (Sold separately)
RMK15: Rack mount kit
VSCD18: 2m/6ft High bitrate DisplayPort™ cable
VSC50: Serial cable, RJ12 to RS232
SFP-SM-LC-10G: Single mode 10G SFP with LC connectors
SFP-MM-LC-10G: Multi-mode 10G SFP with LC connectors



What’s in the Box?

    1x TX and RX pair
    2x power supply unit with country specific mains cable
    1x 2m/6.5ft DisplayPort™ cable (VSCD17)
    1x 2m/6.5ft USB cable (VSC24)
    1x 2m/6.5ft Audio cables
    1x quick start guide

I clienti che hanno visto questo prodotto hanno anche consultato
Accept

This website uses cookies to provide the best possible experience. More information.