MOXA NPort IA5000 Series

NPort® IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPort® IA device servers makes them an ideal choice for establishing network access to RS-232/422/485 serial devices such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. All models are housed in a compact, rugged housing that is DIN-rail mountable.


Cascading Ethernet Ports Make Wiring Easy (10/100BaseTX models)

The NPort® IA5150 and IA5250 device servers each have two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to either another NPort® IA device server or an Ethernet device. The dual Ethernet ports help reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.


Redundant Power Inputs

The NPort® IA5000 device servers have two power inputs that can be connected simultaneously to live DC power sources. If one power source fails, the other source takes over automatically. Redundant power inputs help assure that your device server will operate nonstop.


Relay Output Warning and Email Alerts

The built-in relay output can be used to alert administrators of problems with the Ethernet links or power inputs, or when there is a change in the DCD or DSR serial signals. The web console indicates which Ethernet link or power input has failed, or which serial signal has changed. An email warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.


Optical Fiber for Ethernet Communication

The NPort® IA5000 Series includes 100BaseFX fiber models that support transmission distances up to 5 km for multi-mode models, and up to 40 km for single-mode models. Optical fiber is well-suited for industrial applications because it is immune to electromagnetic noise and interference. For environments that experience high ground loop voltages, fiber provides the best isolation protection, and because there is no danger of sparking, optical fiber is safer than copper wire to use in hazardous environments.


Industrial-grade Certification

To ensure safe and reliable operation in industrial environments, the NPort® IA5000 device servers have obtained various industrial certifications, including an IP30 rating for mechanical protection, UL 508 safety certification for industrial control equipment, and explosion-safe certifications for hazardous locations. Certifications include UL/cUL Class 1 Division 2 Groups A, B, C, D, as well as ATEX Class 1 Zone 2, and IECEx Zone 2.

Specifications

Ethernet Interface


10/100BaseT(X) Ports (RJ45 connector)
2 (1 IP, Ethernet cascade, NPort IA-5150/5150I/5250/5250I)

Magnetic Isolation Protection
1.5 kV (built-in)

100BaseFX Ports (multi-mode SC connector)
NPort IA-5000-M-SC Models: 1
NPort IA-5000-M-ST Models: 1

100BaseFX Ports (single-mode SC connector)
NPort IA-5000-S-SC Models: 1



Ethernet Software Features


Configuration Options
Web Console (HTTP), Windows Utility, Telnet Console, Serial Console

Management
DHCP Client, IPv4, SMTP, SNMPv1, Telnet, ARP, BOOTP, DNS, HTTP, TCP/IP, UDP, ICMP, Rtelnet

Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64),
Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0,
Windows XP Embedded

Linux Real TTY Drivers
Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

Fixed TTY Drivers
SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X, macOS 10.12, macOS 10.13, macOS 10.14, macOS 10.15

Android API
Android 3.1.x and later

Time Management
SNTP

MIB
RFC1213, RFC1317



Serial Interface


Connector
NPort IA-5150: DB9 male for RS-232 and terminal block for RS-422/485
NPort IA-5250: DB9 male for RS-232/422/485

No. of Ports
NPort IA-5150 Models: 1
NPort IA-5250 Models: 2

Serial Standards
RS-232, RS-422, RS-485

Baudrate
Supports standard baudrates (unit=bps): 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230400

Data Bits
5, 6, 7, 8

Parity
None, Even, Odd, Space, Mark

Stop Bits
1, 1.5, 2

Flow Control
RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF

Terminator for RS-485
120 ohms

Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms

Isolation
2 kV (I models)

RS-485 Data Direction Control
ADDC® (automatic data direction control)



Serial Signals


RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND



Power Parameters


Input Voltage
12 to 48 VDC

Input Current
NPort IA-5150/IA-5150-T/IA-5250/IA-5250-T: 435 mA @ 12 VDC
NPort IA-5150I/IA-5150I-T/IA-5150-S-SC/IA-5150-S-SC-T/IA-5150I-M-SC/IA-5150I-M- SC-T/IA-5150I-S-SC/IA-5150I-S-SC-T: 555 mA @ 12 VDC
NPort IA-5250I/IA-5250I-T/IA-5150-M-SC/IA-5150-M-SC-T/IA-5150-M-ST/IA-5150-M-ST-T: 510 mA @ 12 VDC

No. of Power Inputs
2

Power Connector
Terminal block



Relays


Contact Current Rating
Resistive load: 1 A @ 30 VDC



Physical Characteristics


Housing
Plastic

IP Rating
IP30

Dimensions
29 x 89.2 x 118.5 mm (0.82 x 3.51 x 4.57 in)

Weight
NPort IA-5150: 360 g (0.79 lb)
NPort IA-5250: 380 g (0.84 lb)

Installation
DIN-rail mounting



Environmental Limits


Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)
-40 to 85°C (-40 to 167°F)

Ambient Relative Humidity
5 to 95% (non-condensing)



Standards and Certifications


EMC
EN 55032/35

EMI
CISPR 32, FCC Part 15B Class A

EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11

Safety
IEC 60950-1, EN 60950-1, EN 62368-1, UL 508

Maritime
DNV

Hazardous Locations
ATEX, Class I Division 2, IECEx

Freefall
IEC 60068-2-32

Shock
IEC 60068-2-27

Vibration
IEC 60068-2-6, IEC 60068-2-64



Declaration


Green Product
RoHS, CRoHS, WEEE



MTBF


Time
NPort IA-5150/IA-5150I Models: 1,349,710 hrs
NPort IA-5150-M-SC/M-ST/S-SC Models: 1,175,887 hrs
NPort IA-5150I-M-SC Models 768,343 hrs
NPort IA-5150I-S-SC Models: 763,707 hrs
NPort IA-5250/IA-5250I Models: 1,236,384 hrs

Standards
Telcordia (Bellcore) Standard TR/SR

Package Contents

Device
1 x NPort IA-5000 Series device server

Documentation
1 x quick installation guide
1 x warranty card

Ordering Information

Model Name	No. of Ethernet Ports	Ethernet Port Connector	Operating Temp.	No. of Serial Ports	Serial Isolation
NPort IA-5150	2	RJ45	0 to 60°C	1	-
NPort IA-5150-T	2	RJ45	-40 to 75°C	1	-
NPort IA-5150-M-SC	1	Multi-mode SC	0 to 60°C	1	-
NPort IA-5150-M-SC-T	1	Multi-mode SC	-40 to 75°C	1	-
NPort IA-5150-M-ST	1	Multi-mode ST	0 to 60°C	1	-
NPort IA-5150-M-ST-T	1	Multi-mode ST	-40 to 75°C	1	-
NPort IA-5150-S-SC	1	Single-mode SC	0 to 60°C	1	-
NPort IA-5150-S-SC-T	1	Single-mode SC	-40 to 75°C	1	-
NPort IA-5250	2	RJ45	0 to 60°C	2	-
NPort IA-5250-T	2	RJ45	-40 to 75°C	2	-
NPort IA-5150I	2	RJ45	0 to 60°C	1	2 kV
NPort IA-5150I-T	2	RJ45	-40 to 75°C	1	2 kV
NPort IA-5150I-M-SC	1	Multi-mode SC	0 to 60°C	1	2 kV
NPort IA-5150I-M-SC-T	1	Multi-mode SC	-40 to 75°C	1	2 kV
NPort IA-5150I-S-SC	1	Single-mode SC	0 to 60°C	1	2 kV
NPort IA-5150I-S-SC-T	1	Single-mode SC	-40 to 75°C	1	2 kV
NPort IA-5250I	2	RJ45	0 to 60°C	2	2 kV
NPort IA-5250I-T	2	RJ45	-40 to 75°C	2	2 kV