SPHINX CONNECT - Moxa IMC-P21GA-G2 Series Media Converter

10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) compliance
Up to 36 W output on the PoE+ port
Supports store-and-forward and pass-through modes
-10 to 60°C operating temperature
Redundant dual DC power inputs

The IMC-P21GA-G2 Series PoE+ Gigabit Ethernet-to-fiber media converters enable reliable 10/100/1000BaseT(X) to fiber conversions for stable long-distance connections. Acting as power source equipment (PSE), they deliver high-power output for devices like IP cameras and wireless access points, and support up to 36 W on the PoE+ port, with advanced features including PoE diagnostics and Link Fault Pass-through.

IMC-P21GA-G2 PoE+ Gigabit Ethernet-to-fiber media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/ 1000Base-SX/LX or selected 100/1000Base SFP module media conversions. These converters are classified as power source equipment (PSE) and are used to directly power up powered devices (PDs), eliminating the need for additional wiring.

The IMC-P21GA-G2 PoE+ Gigabit Ethernet-to-fiber media converters provide up to 30 watts of power on the PoE+ port in standard mode and allow high-power output of up to 36 watts for heavy-duty industrial PoE devices, such as weather-proof IP surveillance cameras with wipers/heaters, high-performance wireless access points, and IP phones. The IMC-P21GA-G2 media converters are highly versatile, and with SFP fiber ports, can transmit data high EMI immunity for up to 80 km from the device to the control center.

The PoE+ Gigabit Ethernet-to-fiber media converters support a variety of useful functions, as well as PoE diagnostics, Link Fault Pass-through, store-and-forward mode and pass-through mode. The IMC-P21GA-G2 converters support IEEE 802.3/802.3u/802.3x with 10/100/1000M and MDI/ MDI-X auto-sensing, providing a complete solution for your industrial Ethernet networks.

Specifications

Ethernet Interface
100/1000Base SFP Ports	1 (IMC-P21GA-G2 models)
1000Base SX Ports (multi-mode SC connector)	1 (IMC-P21GA-G2-SX-SC models)
1000Base LX Ports (single-mode SC connector)	1 (IMC-P21GA-G2-LX-SC models)
PoE Ports (10/100BaseT(X), RJ45 connector)	1
Optical Fiber Specifications
Fiber Module Optical Interface	Multi-mode, Single-mode
Fiber Data Rate	1000Base-SX (multi-mode), 1000Base-LX (single-mode)
Typical Distance	550 m (multi-mode), 10 km (single-mode)
Wavelength	850 nm (multi-mode), 1310 nm (single-mode)
Optical Power TX Range (dBm)	-3 to -10 (multi-mode), -3 to 9 (single-mode)
Link Budget (dB)	10 (multi-mode), 12 (single-mode)
Magnetic Isolation Protection	1.5 kV (built-in)
Power Parameters
Input Voltage	44 to 57 VDC (PoE+ output requires >52 VDC)
Power Consumption	Max 828 mA
Overload Current Protection	Supported
Physical Characteristics
Housing	Metal
IP Rating	IP40 (with I/O modules attached)
Dimensions	90 x 73 x 20.3 mm (3.54 x 2.87 x 0.79 in)
Weight	212 g (0.47 lb)
Installation	DIN-rail mounting
Environmental Limits
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Standards and Certifications
EMC	EN 55032/35
EMI	CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV; IEC 61000-4-5 Surge: Power: 2 kV, Signal: 1 kV; IEC 61000-4-6 CS: 150 kHz to 80 MHz; Signal: 10 V; IEC 61000-4-8 PFMF
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6, IEC 60068-2-64
Freefall	ISTA 1A
MTBF
Time	8,709,561 hrs
Standards	Telcordia SR332
Warranty
Warranty Period	5 years
Package Contents
Device	1 x IMC-P21GA-G2 Series converter
Documentation	1 x quick installation guide, 1 x warranty card

Ordering Information

Model Name	Operating Temperature	Fiber Module Type
IMC-P21GA-G2	-10 to 60°C	SFP
IMC-P21GA-G2-SX-SC	-10 to 60°C	Multi-mode SC
IMC-P21GA-G2-LX-SC	-10 to 60°C	Single-mode SC

Moxa IMC-P21GA-G2 Series Media Converter Datasheet (1130.6 kB)